Have a query? Ask a Tutor!!

Access to best educators and exclusive paper discussions

Offsite Campus Turito Championship

Can’t find what you’re looking for?

Our tutors are from top schools around the world, and they are waiting for you 24/7, anytime, anywhere.

Homework- One to One Solutions
Understand concepts to solve better
Get your doubts solved instantly

Physics-

General

Easy

Question

An alternating voltage of 141.4V (rms) is applied to a vacuum diode as shown in the figure. The maximum potential difference across the condenser will be

100 V
200 V
$100 \sqrt{2} V$
$200 \sqrt{2} V$

The correct answer is: 200 V

$V subscript p e a k end subscript equals square root of 2 V subscript r m s end subscript equals square root of 2 cross times 141.4 equals 200 V$

Related Questions to study

The diagram of a logic circuit is given below. The output F of the circuit is represented by

The diagram of a logic circuit is given below. The output F of the circuit is represented by

physics-General

The shows two NAND gates followed by a NOR gate. The system is equivalent to the following logic gate

The shows two NAND gates followed by a NOR gate. The system is equivalent to the following logic gate

physics-General

The combination of gates shown below produces

The combination of gates shown below produces

physics-General

parallel

Figure gives a system of logic gates. From the study of truth table it can be found that to produce a high output (1) at R, we must have

Figure gives a system of logic gates. From the study of truth table it can be found that to produce a high output (1) at R, we must have

physics-General

The following configuration of gate is equivalent to

The following configuration of gate is equivalent to

physics-General

For the transistor circuit shown below, if $β = 100$ , voltage drop between emitter and base is 0.7 V then value of $V_{C E}$ will be

For the transistor circuit shown below, if $β = 100$ , voltage drop between emitter and base is 0.7 V then value of $V_{C E}$ will be

physics-General

parallel

In the following circuit find $I_{1}$ and $I_{2}$

In the following circuit find $I_{1}$ and $I_{2}$

physics-General

In the circuit shown in figure the maximum output voltage $V subscript 0 end subscript$ is

In the circuit shown in figure the maximum output voltage $V subscript 0 end subscript$ is

physics-General

Ge and Si diodes conduct at 0.3 V and 0.7 V respectively. In the following figure if Ge diode connection are reversed, the valve of V₀ changes by

Ge and Si diodes conduct at 0.3 V and 0.7 V respectively. In the following figure if Ge diode connection are reversed, the valve of V₀ changes by

physics-General

parallel

A diode is connected to 220 V (rms) ac in series with a capacitor as shown in figure. The voltage across the capacitor is

A diode is connected to 220 V (rms) ac in series with a capacitor as shown in figure. The voltage across the capacitor is

physics-General

In which of the following circuit is the current maximum just after the switch S is closed

In which of the following circuit is the current maximum just after the switch S is closed

physics-General

Range of function f(x) = $fraction numerator x squared plus 2 x plus 3 over denominator x end fraction comma x element of R$ is given by

Range of function f(x) = $fraction numerator x squared plus 2 x plus 3 over denominator x end fraction comma x element of R$ is given by

parallel

Find V_AB

Find V_AB

physics-General

The circuit shown in following figure contains two diode $D subscript 1 end subscript$ and $D subscript 1 end subscript$ each with a forward resistance of 50 ohms and with infinite backward resistance. If the battery voltage is 6 V, the current through the 100 ohm resistance (in amperes) is

The circuit shown in following figure contains two diode $D subscript 1 end subscript$ and $D subscript 1 end subscript$ each with a forward resistance of 50 ohms and with infinite backward resistance. If the battery voltage is 6 V, the current through the 100 ohm resistance (in amperes) is

physics-General

In the following circuits PN-junction diodes D₁, D₂ and D₃ are ideal for the following potential of A and B, the correct increasing order of resistance between A and B will be

i) – 10 V, – 5V (ii) – 5V, – 10 V
iii) – 4V, – 12V

In the following circuits PN-junction diodes D₁, D₂ and D₃ are ideal for the following potential of A and B, the correct increasing order of resistance between A and B will be

i) – 10 V, – 5V (ii) – 5V, – 10 V
iii) – 4V, – 12V

physics-General

parallel

card img

With Turito Academy.

card img

With Turito Foundation.

card img

Get an Expert Advice From Turito.

Turito Academy

card img

With Turito Academy.

Test Prep

card img

With Turito Foundation.