Physics
Grade-9
Easy
Question
Which offers more resistance?
- A
- B
- Both A and B
- Cannot say
Hint:
Resistance is inversely proportional to the diameter of the wire.
The correct answer is: B
Resistance depends on the diameter of the wire.
It can be proven from the,
R = ρ
From this, we can conclude that,
R
R
Thus, when the radius of the wire decreases, resistance will increases.
Hence, wire B has more resistance.
Related Questions to study
Physics
A 10 Ω resistor is to be made from manganin wire with a cross-sectional area of 0.2 mm2 . If manganin has a resistivity of 48 ×10-8 Ohm-m, then the required length of this size manganin wire will be:
A 10 Ω resistor is to be made from manganin wire with a cross-sectional area of 0.2 mm2 . If manganin has a resistivity of 48 ×10-8 Ohm-m, then the required length of this size manganin wire will be:
PhysicsGrade-9
Physics
A copper cable has a length of 450 m and a cross-sectional area of 4.0 mm2. If the resistivity of the copper is 1.72 ×10-8 Ohm-m, then the resistance of this cable will be:
A copper cable has a length of 450 m and a cross-sectional area of 4.0 mm2. If the resistivity of the copper is 1.72 ×10-8 Ohm-m, then the resistance of this cable will be:
PhysicsGrade-9
Physics
The resistance of a material is most determined by four factors – length, cross-sectional area, type of material and _____.
The resistance of a material is most determined by four factors – length, cross-sectional area, type of material and _____.
PhysicsGrade-9
Physics
Resistance does not depend upon
Resistance does not depend upon
PhysicsGrade-9
Physics
Resistance can be described as the
Resistance can be described as the
PhysicsGrade-9
Physics
Identify the correct relation between resistance, resistivity, and area of cross-section and length.
Identify the correct relation between resistance, resistivity, and area of cross-section and length.
PhysicsGrade-9
Physics
If the length and area of cross-section remain the same and resistivity increases. What will be the effect on the resistance?
If the length and area of cross-section remain the same and resistivity increases. What will be the effect on the resistance?
PhysicsGrade-9
Physics
What is the reading on the multimeter?
What is the reading on the multimeter?
PhysicsGrade-9
Physics
A battery of 20 V is connected to a resister of 10Ω, as shown in the figure. The current in the ammeter will be
A battery of 20 V is connected to a resister of 10Ω, as shown in the figure. The current in the ammeter will be
PhysicsGrade-9
Physics
How much work is done when one coulomb charge moves against a potential difference of 1 Volt?
How much work is done when one coulomb charge moves against a potential difference of 1 Volt?
PhysicsGrade-9
Physics
This symbol used in electric circuits represents a
This symbol used in electric circuits represents a
PhysicsGrade-9
Physics
Which readings can be measured using a VOM?
Which readings can be measured using a VOM?
PhysicsGrade-9
Physics
Identify the step which is not correct in measuring the current by a multimeter.
Identify the step which is not correct in measuring the current by a multimeter.
PhysicsGrade-9
Physics
Identify the step which is not correct in measuring the current by an ammeter.
Identify the step which is not correct in measuring the current by an ammeter.
PhysicsGrade-9
Physics
Identify the step which is not correct in measuring the voltage by a voltmeter.
Identify the step which is not correct in measuring the voltage by a voltmeter.
PhysicsGrade-9