Physics
Fluid-Mechanics
Easy
Question
There is a hole in the bottom of tank having water. If total pressure at bottom is 3 atm (1 atm = 105 N/m2) then the velocity of water flowing from hole is
- None
The correct answer is:
Related Questions to study
Physics
A liquid of density 800 kg m-3 is filled in a tank open at the top. The pressure, of the liquid, at the bottom of the tank is 6.4 atmospheres. The velocity of efflux through a hole at the bottom is 
A liquid of density 800 kg m-3 is filled in a tank open at the top. The pressure, of the liquid, at the bottom of the tank is 6.4 atmospheres. The velocity of efflux through a hole at the bottom is
PhysicsFluid-Mechanics
Physics
A hole is made at the bottom of a tank filled with water. If the total pressure (absolute pressure) at the bottom is 3 atmosphere, then velocity of efflux is
A hole is made at the bottom of a tank filled with water. If the total pressure (absolute pressure) at the bottom is 3 atmosphere, then velocity of efflux is
PhysicsFluid-Mechanics
Physics
Two holes are made in the side of the tank such that the jets of water flowing out of them meet at the same point on the ground. If one hole is at a height of 3 cm above the bottom, then the distance of the other hole from the top surface of water is
Two holes are made in the side of the tank such that the jets of water flowing out of them meet at the same point on the ground. If one hole is at a height of 3 cm above the bottom, then the distance of the other hole from the top surface of water is
PhysicsFluid-Mechanics
Physics
A water tank of height 10 m, completely filled with water is placed on a level ground. It has two holes one at 3m and the other at 7 m form its base. The water ejecting from
A water tank of height 10 m, completely filled with water is placed on a level ground. It has two holes one at 3m and the other at 7 m form its base. The water ejecting from
PhysicsFluid-Mechanics
Physics
For the area a of the hole is much lesser than the area of the base of a vessel of liquid, velocity of efflux v of the liquid in an accelerating vessel is:
For the area a of the hole is much lesser than the area of the base of a vessel of liquid, velocity of efflux v of the liquid in an accelerating vessel is:
PhysicsFluid-Mechanics
Physics
When a hole is made in the side of a container holding water, water flows out and follows a parabolic trajectory. If a hole is made in the side of the container and the container is dropped in free fall (just before the water starts coming out), the before the water starts coming out), the water flow (Neglect effect of surface tension)
When a hole is made in the side of a container holding water, water flows out and follows a parabolic trajectory. If a hole is made in the side of the container and the container is dropped in free fall (just before the water starts coming out), the before the water starts coming out), the water flow (Neglect effect of surface tension)
PhysicsFluid-Mechanics
Physics
A siphon in use is demonstrated in the following figure. The density of the liquid flowing in siphon is 1.5 gm / cc. The pressure difference between the point P and S will be
A siphon in use is demonstrated in the following figure. The density of the liquid flowing in siphon is 1.5 gm / cc. The pressure difference between the point P and S will be
PhysicsFluid-Mechanics
Physics
A cylindrical tank has a hole of 1 cm2 in its bottom. If the water is allowed to flow into the tank from a tube above it at the rate of 70 cm3/sec, then the maximum height up to which water can rise in the tank is
A cylindrical tank has a hole of 1 cm2 in its bottom. If the water is allowed to flow into the tank from a tube above it at the rate of 70 cm3/sec, then the maximum height up to which water can rise in the tank is
PhysicsFluid-Mechanics
Physics
There is a hole in the bottom of tank having water. If total pressure at bottom is 3 atm 
then the velocity of water flowing from hole is
There is a hole in the bottom of tank having water. If total pressure at bottom is 3 atm then the velocity of water flowing from hole is
PhysicsFluid-Mechanics
Physics
A large tank is filled with water to a height H. A small hole is made at the base of the tank. It takes time to decrease the height of water to 
; and it takes T2 time to take out the rest of water. If T1=T2, then the value of 
is
A large tank is filled with water to a height H. A small hole is made at the base of the tank. It takes time to decrease the height of water to ; and it takes T2 time to take out the rest of water. If T1=T2, then the value of is
PhysicsFluid-Mechanics
Physics
Column I Shows the Bernoulli's equation in the different forms. Column II lists certain units each of which pertains to one of the possible forms of the equation..
(where z is ratio of height to volume)
Now match the given columns and select the correct option from the codes given below. Codes
Column I Shows the Bernoulli's equation in the different forms. Column II lists certain units each of which pertains to one of the possible forms of the equation..
(where z is ratio of height to volume)
Now match the given columns and select the correct option from the codes given below. Codes
PhysicsFluid-Mechanics
Physics
A Pitot tube is shown in figure. Wind blows in the direction shown. Air at inlet A is brought to rest, whereas its speed just outside of opening B is unchanged. The U tube contains mercury of density 
. Find the speed of wind with respect to Pitot tube. Neglect the height difference between A and B and take the density of air as 
.
A Pitot tube is shown in figure. Wind blows in the direction shown. Air at inlet A is brought to rest, whereas its speed just outside of opening B is unchanged. The U tube contains mercury of density . Find the speed of wind with respect to Pitot tube. Neglect the height difference between A and B and take the density of air as .
PhysicsFluid-Mechanics
Physics
A liquid flows through a horizontal tube as shown in figure. The velocities of the liquid in the two sections, which have areas of cross-section A1 and A2 , are v1 and v2, respectively. The difference in the levels of the liquid in the two vertical tubes is h. Then
A liquid flows through a horizontal tube as shown in figure. The velocities of the liquid in the two sections, which have areas of cross-section A1 and A2 , are v1 and v2, respectively. The difference in the levels of the liquid in the two vertical tubes is h. Then
PhysicsFluid-Mechanics
Physics
A long cylindrical tank of radius 1 m is being filled by a pipe of radius 2 cm. The incoming water has a velocity of 1 m/s. The tank has a hole of radius 1 cm at the bottom. What is the height of water in the tank in steady state?
A long cylindrical tank of radius 1 m is being filled by a pipe of radius 2 cm. The incoming water has a velocity of 1 m/s. The tank has a hole of radius 1 cm at the bottom. What is the height of water in the tank in steady state?
PhysicsFluid-Mechanics
Physics
A horizontal pipe line carries water in streamline flow. At a point where the cross-sectional area is 10 cm2 the water velocity is 1 ms-1 and pressure is 2000 Pa. The pressure of water at another point where the cross-sectional area is 5 cm2 is
A horizontal pipe line carries water in streamline flow. At a point where the cross-sectional area is 10 cm2 the water velocity is 1 ms-1 and pressure is 2000 Pa. The pressure of water at another point where the cross-sectional area is 5 cm2 is
PhysicsFluid-Mechanics
