Physics-
General
Easy
Question
Work done by the system in closed path , is
- Zero
-
-
-
The correct answer is:
Work done = area of
Related Questions to study
Physics-
In the indicator diagram, net amount of work done will be
In the indicator diagram, net amount of work done will be
Physics-General
Physics-
Two isothermally are shown in figure at temperature and . Which of the following relations is correct?
Two isothermally are shown in figure at temperature and . Which of the following relations is correct?
Physics-General
Physics-
A cyclic process is shown in figure. Work done during isobaric expansion is
A cyclic process is shown in figure. Work done during isobaric expansion is
Physics-General
Physics-
An ideal gas is taken from state to state following three different paths as shown in diagram, figure Which one of the following is true?
An ideal gas is taken from state to state following three different paths as shown in diagram, figure Which one of the following is true?
Physics-General
Physics-
A thermodynamical system is taken from state to state along and is brought back to along as shown in figure. Net work done during one complete cycle is given by area.
A thermodynamical system is taken from state to state along and is brought back to along as shown in figure. Net work done during one complete cycle is given by area.
Physics-General
Physics-
As shown in figure three diagrams. In which case, work done is minimum
As shown in figure three diagrams. In which case, work done is minimum
Physics-General
Physics-
In the following diagram figure two adiabates cut two isothermals at and . The value of is
In the following diagram figure two adiabates cut two isothermals at and . The value of is
Physics-General
Physics-
An transistor circuit is arranged as shown in figure. It is
An transistor circuit is arranged as shown in figure. It is
Physics-General
Physics-
The junction diode in the following circuit requires a minimum current of 1mA to be above the knee point (0.7 V) of its characteristic curve. The voltage across the junction diode is independent of current above the knee point, if , then the maximum value of so that the voltage is above knee point will be
The junction diode in the following circuit requires a minimum current of 1mA to be above the knee point (0.7 V) of its characteristic curve. The voltage across the junction diode is independent of current above the knee point, if , then the maximum value of so that the voltage is above knee point will be
Physics-General
Physics-
A junction diode is connected to a 10 V source and rheostate figure. The slope of load line on the characteristic curve of diode will be
A junction diode is connected to a 10 V source and rheostate figure. The slope of load line on the characteristic curve of diode will be
Physics-General
Physics-
The circuit shown in the figure contains two diodes each with a forward resistance of and with infinite backward resistance. If the battery is 3V, the current through the resistance (in ampere) is
The circuit shown in the figure contains two diodes each with a forward resistance of and with infinite backward resistance. If the battery is 3V, the current through the resistance (in ampere) is
Physics-General
Physics-
For the given combination of gates, if the logic states of inputs are as follows and , then the logic states of output are
For the given combination of gates, if the logic states of inputs are as follows and , then the logic states of output are
Physics-General
Physics-
The diode used in the circuit shown in the figure has a constant voltage drop of 0.5 V at all currents and a maximum power rating of 100 mW. What should be the value of the resistor , connected in series with the diode for obtaining maximum current?
The diode used in the circuit shown in the figure has a constant voltage drop of 0.5 V at all currents and a maximum power rating of 100 mW. What should be the value of the resistor , connected in series with the diode for obtaining maximum current?
Physics-General
Physics-
The following configuration of gate is equivalent to figure.
The following configuration of gate is equivalent to figure.
Physics-General
Physics-
A full wave rectifier circuit along with the input and output are shown in the figure, the contribution from the diode is (are)
A full wave rectifier circuit along with the input and output are shown in the figure, the contribution from the diode is (are)
Physics-General