Physics-
General
Easy
Question
Figure shown four thermodynamical process to which a gas sample may be subjected. The isobaric and isothermal curves are
- IV and III
- II and IV
- I and III
- II and III
The correct answer is: IV and III
Curve IV is parallel to volume axis. It represents isobaric curve. Out of II and III, slope of III is smaller. Therefore, III curve represents an isothermal curve
Related Questions to study
Physics-
Work done by the system in closed path 
, is
Work done by the system in closed path , is
Physics-General
Physics-
In the indicator diagram, net amount of work done will be
In the indicator diagram, net amount of work done will be
Physics-General
Physics-
Two isothermally are shown in figure at temperature 
and 
. Which of the following relations is correct?
Two isothermally are shown in figure at temperature and . Which of the following relations is correct?
Physics-General
Physics-
A cyclic process is shown in figure. Work done during isobaric expansion is
A cyclic process is shown in figure. Work done during isobaric expansion is
Physics-General
Physics-
An ideal gas is taken from state 
to state 
following three different paths as shown in 
diagram, figure Which one of the following is true?
An ideal gas is taken from state to state following three different paths as shown in diagram, figure Which one of the following is true?
Physics-General
Physics-
A thermodynamical system is taken from state to state along 
and is brought back to along 
as shown in figure. Net work done during one complete cycle is given by area.
A thermodynamical system is taken from state to state along and is brought back to along as shown in figure. Net work done during one complete cycle is given by area.
Physics-General
Physics-
As shown in figure three diagrams. In which case, work done is minimum
As shown in figure three diagrams. In which case, work done is minimum
Physics-General
Physics-
In the following diagram figure two adiabates cut two isothermals at and . The value of 
is
In the following diagram figure two adiabates cut two isothermals at and . The value of is
Physics-General
Physics-
An 
transistor circuit is arranged as shown in figure. It is
An transistor circuit is arranged as shown in figure. It is
Physics-General
Physics-
The junction diode in the following circuit requires a minimum current of 1mA to be above the knee point (0.7 V) of its 
characteristic curve. The voltage across the junction diode is independent of current above the knee point, if 
, then the maximum value of 
so that the voltage is above knee point will be
The junction diode in the following circuit requires a minimum current of 1mA to be above the knee point (0.7 V) of its characteristic curve. The voltage across the junction diode is independent of current above the knee point, if , then the maximum value of so that the voltage is above knee point will be
Physics-General
Physics-
A junction diode is connected to a 10 V source and 
rheostate figure. The slope of load line on the characteristic curve of diode will be
A junction diode is connected to a 10 V source and rheostate figure. The slope of load line on the characteristic curve of diode will be
Physics-General
Physics-
The circuit shown in the figure contains two diodes each with a forward resistance of 
and with infinite backward resistance. If the battery is 3V, the current through the 
resistance (in ampere) is
The circuit shown in the figure contains two diodes each with a forward resistance of and with infinite backward resistance. If the battery is 3V, the current through the resistance (in ampere) is
Physics-General
Physics-
For the given combination of gates, if the logic states of inputs 
are as follows 
and 
, then the logic states of output 
are
For the given combination of gates, if the logic states of inputs are as follows and , then the logic states of output are
Physics-General
Physics-
The diode used in the circuit shown in the figure has a constant voltage drop of 0.5 V at all currents and a maximum power rating of 100 mW. What should be the value of the resistor , connected in series with the diode for obtaining maximum current?
The diode used in the circuit shown in the figure has a constant voltage drop of 0.5 V at all currents and a maximum power rating of 100 mW. What should be the value of the resistor , connected in series with the diode for obtaining maximum current?
Physics-General
Physics-
The following configuration of gate is equivalent to figure.
The following configuration of gate is equivalent to figure.
Physics-General
