Physics
Fluid-Mechanics
Easy
Question
A tube 1 cm2 in cross section is attached to the top of a vessel 1 cm high and of cross-section 100 cm2. Water is poured into the system filling it to a depth of 100 cm above the bottom of the vessel . 
- The force exerted by the water against the bottom of the vessel is 100 N.
- The weight of water in the system is 1.99 N
- Both (1) and (2) are correct
- Neither (1) nor (2) is correct
The correct answer is: Both (1) and (2) are correct
Related Questions to study
Physics
In previous question, if 15 cm of water and spirit each are further poured into the respective arms of the tube, difference in the level of mercury in the two arms is (Take, relative density of mercury =13.6)
In previous question, if 15 cm of water and spirit each are further poured into the respective arms of the tube, difference in the level of mercury in the two arms is (Take, relative density of mercury =13.6)
PhysicsFluid-Mechanics
Physics
A uniformly tapering vessel of height h whose lower and upper radii are r and R is completely filled with a liquid of density 
. The force that acts on the base of the vessel due of the liquid is
A uniformly tapering vessel of height h whose lower and upper radii are r and R is completely filled with a liquid of density . The force that acts on the base of the vessel due of the liquid is
PhysicsFluid-Mechanics
Physics
A cylindrical vessel containing a liquid is closed by a smooth piston of mass m. If A is the cross-sectional area of the piston and P0 is the atmospheric pressure, then the pressure of the liquid just below the piston is
A cylindrical vessel containing a liquid is closed by a smooth piston of mass m. If A is the cross-sectional area of the piston and P0 is the atmospheric pressure, then the pressure of the liquid just below the piston is
PhysicsFluid-Mechanics
Physics
In a hydraulic lift at a service station, the radii of the large and small pistons are in the ratio of 20: 1. What weight placed on the small piston will be sufficient to lift a car of mass on1200kg?
In a hydraulic lift at a service station, the radii of the large and small pistons are in the ratio of 20: 1. What weight placed on the small piston will be sufficient to lift a car of mass on1200kg?
PhysicsFluid-Mechanics
Physics
The breaking stress of a material is 109 pascal. If the density of material is 3×103 kg/m3. The minimum length of the wire for which it breaks under its own weight will be
The breaking stress of a material is 109 pascal. If the density of material is 3×103 kg/m3. The minimum length of the wire for which it breaks under its own weight will be
PhysicsFluid-Mechanics
Physics
An elastic material of Young’s modulus Y is subjected to a stress S. The elastic energy stored per unit volume of the material is
An elastic material of Young’s modulus Y is subjected to a stress S. The elastic energy stored per unit volume of the material is
PhysicsFluid-Mechanics
Physics
If r is the density of the material of a wire and s the breaking stress, the greatest length of the wire that can hang freely without breaking is:
If r is the density of the material of a wire and s the breaking stress, the greatest length of the wire that can hang freely without breaking is:
PhysicsFluid-Mechanics
Physics
A wire of length L, cross-sectional area A is made of a material of Young’s modulus Y. The wire is stretched by an amount x, which lies well within the elastic limit. The work done (W) by the force is
A wire of length L, cross-sectional area A is made of a material of Young’s modulus Y. The wire is stretched by an amount x, which lies well within the elastic limit. The work done (W) by the force is
PhysicsFluid-Mechanics
Physics
The stress-strain graph for two materials is shown in the figure. If the Young’s modulus for two materials are YA and YB then
The stress-strain graph for two materials is shown in the figure. If the Young’s modulus for two materials are YA and YB then
PhysicsFluid-Mechanics
Physics
External forces acting on a rod of length L, cross-sectional area A and Young's modulus Y are as shown in the figure. Choose the correct alternative
External forces acting on a rod of length L, cross-sectional area A and Young's modulus Y are as shown in the figure. Choose the correct alternative
PhysicsFluid-Mechanics
Physics
The figure shows the stress-strain graph of two materials A and B. Which of the following is incorrect?
The figure shows the stress-strain graph of two materials A and B. Which of the following is incorrect?
PhysicsFluid-Mechanics
Physics
A uniform rod of mass m, length L, area of cross-section A and Young’s modulus Y hangs from the ceiling. Its elongation under its own weight will be
A uniform rod of mass m, length L, area of cross-section A and Young’s modulus Y hangs from the ceiling. Its elongation under its own weight will be
PhysicsFluid-Mechanics
Physics
A wire of cross-section area 3.0 mm2 and natural length 50 cm is fixed at one end and a mass of 2.1 kg is hung from the other end. Young’s modulus of the material of wire is 
. The potential energy stored in the wire in steady state will be (g = 10 m/s2)
A wire of cross-section area 3.0 mm2 and natural length 50 cm is fixed at one end and a mass of 2.1 kg is hung from the other end. Young’s modulus of the material of wire is . The potential energy stored in the wire in steady state will be (g = 10 m/s2)
PhysicsFluid-Mechanics
Physics
A metal wire of length L and radius r is clamped rigidly at one end. A force F is applied at another end so that its length increases by L. The increase in length of another metal wire of length 2L and radius 2r, when stretched by a force 2F, will be
A metal wire of length L and radius r is clamped rigidly at one end. A force F is applied at another end so that its length increases by L. The increase in length of another metal wire of length 2L and radius 2r, when stretched by a force 2F, will be
PhysicsFluid-Mechanics
Physics
PhysicsFluid-Mechanics
